Tagged: Water Tanks

1

3873Hrs – Doing All I Can

That’s the theme right now as time ticks away and the pressure starts to ramp up. I had trouble sleeping last night as my brain fizzed with thoughts of moving out of our rental cottage, lists...

3

3617Hrs – F In Fillets

I suspect any Wharram builder will tell you the same, epoxy filleting is a pain in the ass. There must be miles of them in a Tiki 38 and despite having completed many of them I...

3605Hrs – Me And My Bright Ideas 4

3605Hrs – Me And My Bright Ideas

I’m not sure if I’ve mentioned this before but working on a project like this is all consuming. The hours I’ve logged might equate to nearly two years of working a 40 hour week but there’s...

3599Hrs – Moving Inside 0

3599Hrs – Moving Inside

As planned I moved inside the boat today although not quite as methodically as I thought. I spent quite a while re-fitting the port water tank fittings properly and then testing for leaks before getting it...

2

2620Hrs – Plan B Starts Here

First off I’d like to thank everyone who left comments on my last post, as always I’m humbled by your support and it has helped me enormously to re-focus and to get started on Plan B. Thanks...

1

2594Hrs – Tanking Along

After a couple of days away from the build I was keen to get back to work today. There’s no sign of Spring arriving anytime soon and it was only just above freezing again this morning...

0

2588Hrs – Working In And Out

As seems to be becoming the norm these days I mixed the jobs up a bit again today. It was freezing first thing so I opted to work down below first and decided to have a...

2

2581Hrs – Looking Brighter

Still bitterly cold today but at least the wind had eased down and changed direction enough that it was a bit calmer in the barn and I was pleased to find everything still intact. It looks...

Water System 4

Water System

As planned I had a desk day today but I still managed to spend some time on ‘Gleda’nonetheless. Firstly I put together an order for the parts needed for the water system. I’m keeping it simple i.e. non-pressurised...