Tagged: Side Deck Lockers

2

3288Hrs – Moving Forward Again

Back to work today, a cold one though, first ice of the Winter this morning. I got my fresh epoxy supply decanted into my big keg and tucked away safe in the epoxy warmer then warmed...

3273Hrs – Side-Decks Glassed 0

3273Hrs – Side-Decks Glassed

I managed to encourage enough epoxy out of the keg to glass the side-decks and locker lids today. I might just have enough left to coat the undersides, I hope so because then I can paint...

0

3271Hrs – Well Hung

Thanks to a sneaked in hour over the weekend during which I was able to get an epoxy fairing coat on the other side of the rudders, I was able to get them sanded and primer...

1

3265Hrs – Missed Again

I’d aimed to finish the rudders this week, it isn’t going to happen. I didn’t allow for the time needed for the epoxy to dry on each side before I’m able to work on the other....

0

3259Hrs – Seeing Things Differently

Is anything ‘real’ or is everything simply a creation of individual perception? When I go to the barn and look at ‘Gleda’ am I seeing her as she really is or as my mind has decided...

3253Hrs – Working For It 4

3253Hrs – Working For It

You are never given a dream without also being given the power to make it true. You may have to work for it, however. ― Richard Bach That quote could have been written for this project, all...

0

3247Hrs – Multi Task Day

I really need to get something finished soon. Today I worked on the rudder support blocks, the rudders, the side decks and the side deck lockers. When I look up at the boat I see an...

2

3241Hrs – Worse Things Happen At Sea

Well the superstorm decided to pass further South of us than predicted meaning we got lots of rain but missed the strongest winds. A gust of 99mph was recorded at The Needles on the Isle of...

2

3210Hrs – Side Lockers Assembled, Rudders Up Next

Today I plugged on with the side lockers and ended my work session with both of them glued together ready for final finishing. Nothing particularly exciting about the work today, I just worked methodically pre-cutting all...