1662Hrs- Connecting The Two
A good work session today working on the two side decks of the starboard hull connecting the large curved forward section of main cabin roof to the small aft section. I’d successfully joined glued the four longitudinal stringers and the lower pieces of ply the other day but there was a fair bit of cleaning up to do and I spent a good deal of time check measuring and taking levels to make sure everything was right. I had to trim a couple of partial bulkhead tops to get everything spot on and then drop in two little transverse blocks next to the inboard beam trough as this will be cut out later. Then it was a case of cutting and dry fitting the polystyrene sandwich material before gluing and clamping everything together. All in all a pleasing bit of progress. Apologies for the lack of photos, I forgot to take the camera. I’ll post some tomorrow.